D: [iurt_root_command] chroot Installing /home/baz/rpmbuild/SRPMS/qsstv-9.5.11-1.8.mga.src.rpm Building target platforms: x86_64 Building for target x86_64 Executing(%prep): /bin/sh -e /home/baz/rpmbuild/tmp/rpm-tmp.5HER2j + umask 022 + cd /home/baz/rpmbuild/BUILD + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + cd /home/baz/rpmbuild/BUILD + rm -rf qsstv-9.5.11 + /usr/lib/rpm/rpmuncompress -x /home/baz/rpmbuild/SOURCES/qsstv-9.5.11.tar.gz + STATUS=0 + '[' 0 -ne 0 ']' + cd qsstv-9.5.11 + rm -rf /home/baz/rpmbuild/BUILD/qsstv-9.5.11-SPECPARTS + /usr/bin/mkdir -p /home/baz/rpmbuild/BUILD/qsstv-9.5.11-SPECPARTS + /usr/bin/chmod -Rf a+rX,u+w,g-w,o-w . + /usr/lib/rpm/rpmuncompress /home/baz/rpmbuild/SOURCES/qsstv-9.5.11-rigcontrol.cpp.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch -f + /usr/lib/rpm/rpmuncompress /home/baz/rpmbuild/SOURCES/qsstv-9.5.11-mga-qwt6.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch -f + /usr/lib/rpm/rpmuncompress /home/baz/rpmbuild/SOURCES/qsstv-9.5.11-mga-url.patch + /usr/bin/patch -p1 -s --fuzz=0 --no-backup-if-mismatch -f + rm -rf documentation + rm -rf qwt + RPM_EC=0 ++ jobs -p + exit 0 Executing(%build): /bin/sh -e /home/baz/rpmbuild/tmp/rpm-tmp.eBHWM4 + umask 022 + cd /home/baz/rpmbuild/BUILD + cd qsstv-9.5.11 + '[' 1 -eq 1 ']' + '[' 1 -eq 1 ']' + /usr/lib64/qt6/bin/qmake libsuff=64 'QMAKE_CFLAGS=-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full' 'QMAKE_CXXFLAGS=-O2 -g -pipe -Wformat -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -m64 -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection=full' 'QMAKE_LFLAGS=-Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-z,now -Wl,-O1 -Wl,--build-id=sha1 -Wl,--enable-new-dtags -specs=/usr/lib/rpm/redhat/redhat-hardened-ld' QMAKE_STRIP= PREFIX=/usr CONFIG+=debug src/qsstv.pro Info: creating stash file /home/baz/rpmbuild/BUILD/qsstv-9.5.11/.qmake.stash Project MESSAGE: Compiling for x86 Project MESSAGE: dox will be generated + /usr/bin/make -O -j4 V=1 VERBOSE=1 /usr/lib64/qt6/libexec/uic src/editor/gradientform.ui -o ui_gradientform.h cd /home/baz/rpmbuild/BUILD/qsstv-9.5.11/src/documentation/manual ;doxygen manual.y; cd /home/baz/rpmbuild/BUILD/qsstv-9.5.11/src ;doxygen /home/baz/rpmbuild/BUILD/qsstv-9.5.11/src/documentation/api/api.doxy; /bin/sh: line 1: cd: /home/baz/rpmbuild/BUILD/qsstv-9.5.11/src/documentation/manual: No such file or directory error: configuration file manual.y not found! Doxygen version 1.10.0 (GIT-NOTFOUND) Copyright Dimitri van Heesch 1997-2021 You can use doxygen in a number of ways: 1) Use doxygen to generate a template configuration file*: doxygen [-s] -g [configName] 2) Use doxygen to update an old configuration file*: doxygen [-s] -u [configName] 3) Use doxygen to generate documentation using an existing configuration file*: doxygen [configName] 4) Use doxygen to generate a template file controlling the layout of the generated documentation: doxygen -l [layoutFileName] In case layoutFileName is omitted DoxygenLayout.xml will be used as filename. If - is used for layoutFileName doxygen will write to standard output. 5) Use doxygen to generate a template style sheet file for RTF, HTML or Latex. RTF: doxygen -w rtf styleSheetFile HTML: doxygen -w html headerFile footerFile styleSheetFile [configFile] LaTeX: doxygen -w latex headerFile footerFile styleSheetFile [configFile] 6) Use doxygen to generate a rtf extensions file doxygen -e rtf extensionsFile If - is used for extensionsFile doxygen will write to standard output. 7) Use doxygen to compare the used configuration file with the template configuration file doxygen -x [configFile] Use doxygen to compare the used configuration file with the template configuration file without replacing the environment variables or CMake type replacement variables doxygen -x_noenv [configFile] 8) Use doxygen to show a list of built-in emojis. doxygen -f emoji outputFileName If - is used for outputFileName doxygen will write to standard output. *) If -s is specified the comments of the configuration items in the config file will be omitted. If configName is omitted 'Doxyfile' will be used as a default. If - is used for configFile doxygen will write / read the configuration to /from standard output / input. If -q is used for a doxygen documentation run, doxygen will see this as if QUIET=YES has been set. -v print version string, -V print extended version information -h,-? prints usage help information doxygen -d prints additional usage flags for debugging purposes error: configuration file /home/baz/rpmbuild/BUILD/qsstv-9.5.11/src/documentation/api/api.doxy not found! Doxygen version 1.10.0 (GIT-NOTFOUND) Copyright Dimitri van Heesch 1997-2021 You can use doxygen in a number of ways: 1) Use doxygen to generate a template configuration file*: doxygen [-s] -g [configName] 2) Use doxygen to update an old configuration file*: doxygen [-s] -u [configName] 3) Use doxygen to generate documentation using an existing configuration file*: doxygen [configName] 4) Use doxygen to generate a template file controlling the layout of the generated documentation: doxygen -l [layoutFileName] In case layoutFileName is omitted DoxygenLayout.xml will be used as filename. If - is used for layoutFileName doxygen will write to standard output. 5) Use doxygen to generate a template style sheet file for RTF, HTML or Latex. RTF: doxygen -w rtf styleSheetFile HTML: doxygen -w html headerFile footerFile styleSheetFile [configFile] LaTeX: doxygen -w latex headerFile footerFile styleSheetFile [configFile] 6) Use doxygen to generate a rtf extensions file doxygen -e rtf extensionsFile If - is used for extensionsFile doxygen will write to standard output. 7) Use doxygen to compare the used configuration file with the template configuration file doxygen -x [configFile] Use doxygen to compare the used configuration file with the template configuration file without replacing the environment variables or CMake type replacement variables doxygen -x_noenv [configFile] 8) Use doxygen to show a list of built-in emojis. doxygen -f emoji outputFileName If - is used for outputFileName doxygen will write to standard output. *) If -s is specified the comments of the configuration items in the config file will be omitted. If configName is omitted 'Doxyfile' will be used as a default. If - is used for configFile doxygen will write / read the configuration to /from standard output / input. If -q is used for a doxygen documentation run, doxygen will see this as if QUIET=YES has been set. -v print version string, -V print extended version information -h,-? prints usage help information doxygen -d prints additional usage flags for debugging purposes make: *** [Makefile:1187: dox] Error 1 make: *** Waiting for unfinished jobs.... /usr/lib64/qt6/libexec/uic src/config/guiconfig.ui -o ui_guiconfig.h /usr/lib64/qt6/libexec/uic src/config/soundconfig.ui -o ui_soundconfig.h /usr/lib64/qt6/libexec/uic src/utils/loggingform.ui -o ui_loggingform.h error: Bad exit status from /home/baz/rpmbuild/tmp/rpm-tmp.eBHWM4 (%build) RPM build errors: Bad exit status from /home/baz/rpmbuild/tmp/rpm-tmp.eBHWM4 (%build) I: [iurt_root_command] ERROR: chroot